Teclub Screenwash De-Icer Base is an environment-friendly screenwash base. It is a well balanced mixture of >96% renewable-source products: alcohols, water and surfactants. This bioproduct is denaturated with small amounts of glycols, denatonium benzoate and ketones in accordance to the European Customs regulations.
Teclub Screenwash De-Icer Base can be blue dyed or citrus perfumed upon customer request. Anionic tenside used in the formulation:
- is compliant to the European Detergent Directive N° 648/2004/EC
- is approved by the Nordic Swan eco-labelled products
- gives superior cleaning and wetting properties
The best cleaning performance can be easily obtained by diluting Teclub Screenwash De-Icer Base with water.
|
 Tests
|
 Units
|
 Methods
|
 Specification
|
 Typical
|
|
| Â Aspect | Â Visual | Â Clear | Â Bright | Â C&B | |
|  Density in vac. @ 20°C |  g/ml |  ASTM D 4052 | Min Max |
 0.810 0.820 |
 0.8125 |
| Â Water content | Â % m/m | Â ASTM E 1064 | Max | Â 7.50 | Â 6.30 |
| Â Water content | Â % v/v | Â ASTM D 1364 | Max | Â 5.00 | Â 4.10 |
| Â Monoethyleneglycol | Â % m/m | Â GC (SGS SPI 221-3) | Min | Â 1.50 | Â 2.00 |
| Â German Methylethylketone | Â % m/m | Â GC (SGS SPI 221-3) | Min | Â 1.00 | Â 1.30 |
| Â Denatonium benzoate | Â Gr/hlap | Â Calculated by SGS | Min | Â 1.00 | Â 1.20 |
| Â Anionic Tenside | Â ASTM D445 | Min | Â 0.1 | Â 0.15* | |
| Â Freezing point mixed with demineralized water, first crystals -concentrate -60 % vol parts product -50 % vol parts product -33 % vol parts product -25 % vol parts product |
 °C |  ASTM D 1177 modified | Max Max Max Max Max |
 -75 -38 -31 -18 -10 |
 -82 -40 -33 -19 -12 |
|  Flash Point, PMCC |  °C |  ASTM D 93 | Max |  +17 |  +15 |
| Â Flash Point, PMCC -60 % vol parts product |
 °C |  ASTM D 93 | Min |  +22 |  +23 |
| Â Water Miscibility -50 % vol parts product -33 % vol parts product -25 % vol parts product |
 ASTM D 1722 |  Passes Passes Passes |
 Passes Passes Passes |
||
| Â pH-value -50 % vol parts product |
 ASTM D E 70 | Min |  7.0 |  7.30 | |
|  Refractive Index @ 20°C |  ASTM D 1218 | Min Max |
 1.3630 1.3670 |
 1.3651 | |
| Â Cleaning Performance Max sufficient cleaning – Free sight – Clean |
 Cleaning cycle |   QMA 2001.1405 |
Max Max |
 11 11 |
 9* 10* |
| Â Polycarbonate compatibility | Â Hella test | Â QMA 2001.1428 |
No stress crackings | Â Passes | |
|  Plastics compatibility @ room t° And at 50°C Polyethylene (PE) Polypropylene (PP) Polystyrene (PS) Polymethylmethacrylate (PMMA) Acrylonitril-Butadiene-Styrene (ABS) Polyoxymethylene (POM) Polyvinylchloride (PVC) Polyamide (PA) |
 QMA 2001.1478 |
No changes No changes No changes No changes No changes No changes No changes No changes |
No changes No changes No changes No changes No changes No changes No changes No changes |
||
| Â Rubber compatibility | Â QMA 2001.1425 |
No changes | No changes | ||
|  Lacquer compatibility @ room °t And @ 80°C Grey, metallic (OPEL moonland grey) Black, metallic (MB 189) Dark Blue, uni (VW Y5L) Red, uni (BMW imolared II) |
 QMA 2001.1400 |
No changes No changes No changes No changes |
No changes No changes No changes No changes |
||
