TECLUB Brake Fluid DOT 4 Low Viscosity (LV) is a high performance brake and clutch fluid with a minimum boiling point of 260°C, greatly exceeding FMVSS Nr.116 DOT 4, SAE J1703 & SAE J1703, ISO4925 Class 3 & 4 and JIS K2233. In addition, TECLUB Brake Fluid DOT 4 Low Viscosity (LV) meets various severe corrosion requirements.
General information
The brake fluid forms an essential component in the braking system of a car. In service, the brake fluid absorbs moisture which causes a significant reduction in the boiling point of the brake fluid, with a consequent risk of vapour lock. Use of brake fluids meeting DOT 4 standard limits the effect of water absorption on the brake fluid boiling point. TECLUB Brake Fluid DOT 4 Low Viscosity (LV) provides extended system life to the brake components of a car by (1) offering a longer protection against corrosion during service life, i.e. by retaining a high reserve alkalinity over ageing, and (2) providing a better protection against corrosion at saline conditions. TECLUB Brake Fluid DOT 4 Low Viscosity has been designed for low viscosity performance at low temperature offering the potential of rapid response in advanced brake control systems, such as Electronic Stability Programme (ESP).
Use
TECLUB brake fluids are completely miscible with one another and are compatible with other approved DOT glycol ether and borate ester brake fluids.
They must not be mixed with silicone type or silicate ester type brake fluids.
Dosage
Follow the service interval recommended by the car manufacturer. If no recommendation is given, it is advised to replace brake fluid at least every two years, preferably every year, every 40.000 km or when the water percentage in the brake fluid is above 2%.
